WINDLINK® LIHCH 250V

Halogenfree Control Cables LiHCH

The cable has to be oil resistant. Test according to EN60811-2-1 (based on to IEC60811-2-1)

2 times 4 hours at 70°C in oil IRM 902
After 4 hours the cable shall be checked for damage to the isolation. If still ok the test will continue 4 hours more with a final examination of the isolation.

Max tensile strength variation: +/- 40% (HD22.1, table 2, ref no 1.4.2)

Elongation: +/- 40% (HD22.1, table 2, ref no 1.4.3)

The cable has to have low emission of smoke. Smoke visibility according to EN50268 (based on IEC61034)
Level for smoke visibility is >60%

The cable has to be halogen free, have low emission of corrosive gases and acid.

Halogen free – without Chlorine, Fluorine and Bromine

Corrosive gases and acid content according to HD22.13 and EN50267-1 and EN50267-2 (based on IEC60754)

Cable has to resist 2000 Twist cycles [+/- 150°/m] at any temperature within the temperature range.

(Info.: The turbines twist the cable +/-4 turns on 10 m cable)