English conectarse Registrarse Catalog Browser Contact Us
Experto global en cableado y en sistemas de cableado

Sobre Nexans

Productos y Soluciones

Servicios al cliente

Trabaje en Nexans

Noticias y prensa

IR

DWK-HX

Bookmark Imprimir Contactanos
Halogenfree, crosslinked.
Estándares
Nacional  VG 95218 part 29; VG 95218 part 29
Descripción

Approval/Certificates

For these RHEYHALON® Navy cables following certificates/approvals are available:

  • BWB Certificate of Approval according to VG 95211
  • VDE Certificate of conformity with manufacturingsurveillance  
  • Approved QPL manufacturer according VG 95212-22
  • Certified manufacturer according ISO 9001

Applications

Pressurized water tight (longitudinal and traversal waterblocked) cable according this specification will be used asconnecting cable in moisture rooms and in seawater at pressure upto 60 bar. 

Design

  1. Conductor:

    Consist of 9 tinned wires - 1inner wire and 8 concentric
  2. Filler

    Vulcanized rubber compound similar to 3GI3 acc. to DIN VDE0207
  3. Insulation:

    Vulcanized rubber compound 3GI3 acc. to DIN VDE 0207
  4. Outer sheath

    Crosslinked elastomer compound, colour black

Core Identification

Marking by core

1. Core blue

2. Core black

 

Marking

Colour of outer sheath black, marked by printing in contrast-colour

Sample:

l NEXANS l D 0768 VG 95218 T029 A001 DWK-HX 2x1,5500 V


 TOP
Características
Características de construcción
Material del conductor Tinned wire  
Material of filler / inner sheath Vulcanized rubber  
Aislamiento Vulcanized rubber compound 3GI3  
Libre de halógenos  
Cubierta exterior Cross-linked elastomer  
Características dimensionales
Sección del conductor 1.5mm²  
Número de conductores 2  
Número total de hilos 9  
Diámetro del conductor 3.9mm  
Average insulation thickness 0.7mils  
Average sheath thickness 1.0mm  
Wire diameter 0.69mm  
Diámetro exterior máximo 10.8mm  
Precision of diameter +/- 0.3 mm  
Peso aproximado 165kg/km  
Características eléctricas
Maximum operating voltage 500V  
Características de uso
Factor de curvatura una vez instalado 4(xD)  
Dynamic bending factor 4(xD)  
Minimum installation temperature -10°C  
Temperatura máxima operativa 115°C  
Temperatura máxima del conductor en corto-circuito 200°C  

 TOP
Nexans © copyright 2001 - 2012   Legal Notice | Contact Us | Site Map