|
Construction: 24 AWG bare copper wire insulated with polyethylene. Two insulated conductors twisted together to form a pair and four such pairs cabled around a cross filler to form the basic unit which is injected with a water resistant flooding compound and jacketed with UV resistant polyethylene jacket.
Standards: North American: ANSI/TIA/EIA-568-B.2-1 Category 6
Flame Rating: Not flame rated
Applications: Berk-Tek's LANmark-6 UTP cable is intended for high speed data applications including:
- IEEE 802.3 1000BASE-T 1 Gb/s
- TIA/EIA-854 1000BASE-TX 1 Gb/s
- ATM 155 Mb/s 155 Mb/s
- IEEE 802.3 100BASE-TX 100 Mb/s
- CDDI 100 Mb/s
- IEEE 802.3 10BASE-T 10 Mb/s
Features
- Meets the requirements of ANSI/TIA/EIA-568-B.2-1
- Usable bandwidth up to 250 MHz
- Fully water blocked
Benefits
- Can be used to interconnect buildings or can be run beneath a slab in duct or conduit
- Simplified structured cabling solution preserving long-term network investment
- Warranted, trouble-free cabling installation and maintenance
- Meets NEC requirement for wet locations
|