español Login Get Registered Catalog Browser Contact Us
Global expert in cables and cabling system

About Nexans

Products and Solutions

Customer Service

Work at Nexans

News and Press

Go

DWK-HX

Send link to this page print Your Nexans contact on this page
Halogenfree, crosslinked.
Standards
National  VG 95218 part 29; VG 95218 part 29
Description

Approval/Certificates

For these RHEYHALON® Navy cables following certificates/approvals are available:

  • BWB Certificate of Approval according to VG 95211
  • VDE Certificate of conformity with manufacturingsurveillance  
  • Approved QPL manufacturer according VG 95212-22
  • Certified manufacturer according ISO 9001

Applications

Pressurized water tight (longitudinal and traversal waterblocked) cable according this specification will be used asconnecting cable in moisture rooms and in seawater at pressure upto 60 bar. 

Design

  1. Conductor:

    Consist of 9 tinned wires - 1inner wire and 8 concentric
  2. Filler

    Vulcanized rubber compound similar to 3GI3 acc. to DIN VDE0207
  3. Insulation:

    Vulcanized rubber compound 3GI3 acc. to DIN VDE 0207
  4. Outer sheath

    Crosslinked elastomer compound, colour black

Core Identification

Marking by core

1. Core blue

2. Core black

 

Marking

Colour of outer sheath black, marked by printing in contrast-colour

Sample:

l NEXANS l D 0768 VG 95218 T029 A001 DWK-HX 2x1,5500 V


 TOP
Characteristics
Construction characteristics
Conductor material Tinned wire  
Material of filler / inner sheath Vulcanized rubber  
Insulation Vulcanized rubber compound 3GI3  
Halogen free Yes  
Outer sheath Cross-linked elastomer  
Dimensional characteristics
Conductor cross-section 1.5mm²  
Number of cores 2  
Total number of wires 9  
Conductor diameter 3.9mm  
Average insulation thickness 0.7mils  
Average sheath thickness 1.0mm  
Wire diameter 0.69mm  
Maximum outer diameter 10.8mm  
Precision of diameter +/- 0.3 mm  
Approximate weight 165kg/km  
Electrical characteristics
Maximum operating voltage 500V  
Usage characteristics
Bending factor when installed 4(xD)  
Dynamic bending factor 4(xD)  
Minimum installation temperature -10°C  
Maximum operating temperature 115°C  
Short-circuit max. conductor temperature 200°C  

 TOP
Nexans © copyright 2001 - 2012   Legal Notice | Contact Us | Site Map