español Login Get Registered Catalog Browser Contact Us
Global expert in cables and cabling system

About Nexans

Products and Solutions

Customer Service

Work at Nexans

News and Press
Go
Special cables
Bus cables
Coaxial cables
Fibre Optical
HV cables & systems
RHEYHALON (N)TMCGCHXOE (26/45 kV)
Jumper cables
Home  >  > Special Cables  > Rolling stock dedicated cables  > Special cables  > HV cables & systems  > RHEYHALON (N)TMCGCHXOE (26/45 kV)

RHEYHALON (N)TMCGCHXOE (26/45 kV)
Send link to this page print Your Nexans contact on this page
Send link print contact us
RHEYHALON (N)TMCGCHXOE (26/45 kV) In line with EN 50264 and IEC 60502
Halogenfree medium voltage cable
Standards
International  EN 50264; IEC 60502; Manufacturer specification
National  BS 6853; DIN 5510-1; DIN VDE 0295; DIN VDE 0298
Description

Applications

For inside and outside use in railway vehicles. Installation in cable ducts or tubes.

Current-carrying capacity acc. to EN 50343 as well as VDE 0298 part 5. Satisfies performance requirements to Hazard Level 4 acc. to EN 45545-1

On request available: completely pre-assembled flexible cables with plugs and sealing ends, electrically tested.

 

Design

1. Conductor 

Flexible stranded tinned copper, acc. to DIN VDE 0295  / IEC 60228
/ HD 383 class 5

2. Inner conductive layer

conductive rubber

3. Insulation 

HEPR, type EI110 acc. to EN 50264-1
high voltage compound, ozone resistant

4. Outer conductive layer

conductive rubber (Thermo-Strip)

5. Screen

single wires, tinned (Ø 0,6 mm), separator

6. Outer sheath

Special cross-linked EVA, rubber type EM104  acc. to EN 50264-1,
oil, diesel-oil, ozone and uv resistant

 

Cable marking

Ink marking white e.g.:

RHEYHALON VDE-Reg.-Nr. 7969  (N)TMCGCHXOE 1x95mm² RF/16 25/45 kV Year

 

Additional Standards

DIN 5510 part 1, flame protection class 1, 2, 3 and 4
BS 6853

 TOP
Characteristics
Construction characteristics
Halogen free IEC 60754-1  
Electrical characteristics
Rated Voltage Uo/U (Um) 26 / 45 kV  
Usage characteristics
Operating temperature, range -40 .. 90°C  
Gases corrosivity No acc. to EN 50267-2-2  
Gases toxicity innocuous EN 50305-9.2  
Flame retardant EN 60332-1-2 & EN 60332-3-24 & EN 60332-3-25  
Smoke density EN/IEC 61034-2  
Bending factor when installed 6(xD)  
Bending factor when laying 10(xD)  
Oil resistance Yes  
Ozone resistance Yes  
U.V resistance Yes  

 TOP
Your selection
Conductor cross-section  mm²
Screen section  mm²
Diameter over external semi-conductor  mm
Minimum outer diameter  mm
Maximum outer diameter  mm
Fire load  kWh/m
Approximate weight  kg/km
Apply
Reset
Results   4/4
Select all Items Nexans ref. Cross section (mm²) Screen section (mm²) Diameter over external semi-conductor (mm) Min. outer diam. (mm) Max. outer diam. (mm) Fire load (kWh/m) Approx. weight (kg/km)
79470574 50 16 29.0 34.0 36.0 7 2100
79470575 95 16 32.0 38.0 40.0 8 2500
79470576 150 16 36.0 41.0 43.0 10 3200
79470577 240 25 40.0 45.0 48.0 11 4300
Add to favorites

 TOP
Electrical properties

Nominal voltage

Uo/U (Umax) = 26/45 (54) kV

Max. operating voltage

Uo max = 32 kV

Test voltage                                                              Core/Screen (5 minutes)

Uo = 70 kV

Core/Screen (1 minutes)

Uo = 75 kV

Partial discharge measurement by 52 kV,  on pre-assembled flexible cable     

≤ 5 pC


Max. operating temperature at conductor

Conductor at normal operation

≤ 90 °C/250.000 h

 

≤ 120 °C/20.000 h

Overload 

≤ 160 °C / 50 h

Conductor under short-circuit conditions (tinned)

≤ 200 °C


 TOP
Selling delivery information
  • Other cross-sections on request.
  • Special conditions relating temperature and bending radii (e.g. by compelled guidance into cluthes, wagon transition and boogies) on request.

    • Nexans © copyright 2001 - 2012   Legal Notice | Contact Us | Site Map