español Login Get Registered Catalog Browser Contact Us
Global expert in cables and cabling system

About Nexans

Products and Solutions

Customer Service

Work at Nexans

News and Press
Go
Rolling stock cables
LV Xlink polyolefin cables
Rubber Power cables
RHEYHALON (N)SHXAFCOE 1.8/3 (3.6) kV
Special cables
Home  >  > Products  > Special Cables  > Rolling stock dedicated cables  > Rubber Power cables  > RHEYHALON (N)SHXAFCOE 1.8/3 (3.6) kV

RHEYHALON (N)SHXAFCOE 1.8/3 (3.6) kV
Send link to this page print Your Nexans contact on this page
Send link print contact us
RHEYHALON (N)SHXAFCOE 1.8/3 (3.6) kV EN 50264-3-1, tab. 3
Halogenfree screened and sheathed single core cable
1,8/3 kV
Standards
International  EN 50264-3-1
National  BS 6853; DIN 5510-1; DIN VDE 0295; DIN VDE 0298
Description

Applications

For use in railway vehicles (trains, locomotives, trolleybusses, etc.), switching stations and control panels.

Installation in cable ducts, tubes and outside. For wiring in switching stations and distribution boards up to 1000 V, this cable is short-circuit and earth fault save.

Current-carrying capacity acc. to EN 50343 as well as VDE 0298 part 4.
Satisfies performance requirements acc. to EN 45545-1.

This product is also part of our WINDLINK® offer dedicated to wind turbines.

Design

1. Conductor
Flexible stranded tinned copper, acc. to DIN EN 60228 class 5.

2. Insulation
Doublelayer insulation, type EI110/EI109 (EM104) acc. to EN 50264-1
oil- and diesel-oil resistant

3. Separator
Optional foil or tape 

4. Screen
Tinned copper wire braid, covering app. 85%

5. Separator
Optional foil or tape

6. Outer sheath
Special cross-linked EVA,  type EM104 acc. to EN 50264-1,
oil,  diesel-oil, ozone and uv resistant

 

Cable marking

Ink marking white, e.g.:

RHEYHALON VDE-Reg.-Nr. 9682 (N)SHXAFCOE 1.8/3 kV EN 50264-3-1
1800 V 35 MM S FA-Nr. ...

Standards

DIN 5510 part 1, flame protection class 1, 2, 3 and 4; BS 6853

 TOP
Characteristics
Construction characteristics
Halogen free IEC 60754-1  
Usage characteristics
Operating temperature, range -40 .. 90°C  
Gases corrosivity No acc. to EN 50267-2-2  
Gases toxicity innocuous EN 50305-9.2  
Flame retardant EN 60332-1-2 & EN 60332-3-24 & EN 60332-3-25  
Smoke density EN/IEC 61034-2  
Bending factor when installed 6(xD)  
Bending factor when laying 10(xD)  
Oil resistance Yes  
Ozone resistance Yes  
U.V resistance Yes  

 TOP
Electrical properties

Nominal voltage 

Uo/U (Umax) = 1.8/3 (3.6) kV

Max. operating voltage in d.c. installations, one-sided earthed                                                              

Uo= 2.7 kV DC

Testing a.c. voltage (5 minutes) 

U = 6.5 kV

Coupling resistance 10 kHz – 30 MHz 

≤ 50 Ohm/km


Max. operating temperature at conductor

Conductor at normal operation

≤ 90 °C/250.000 h

 

≤ 120 °C/20.000 h

Overload 

≤ 160 °C / 50 h

Conductor under short-circuit conditions (tinned)

≤ 200 °C


 TOP
Selling delivery information

  • Other cross-sections on request.

  • Special conditions relating temperature and bending radii (e.g. by compelled guidance into cluthes, wagontransition and boogies) on request.

    		•

    Nexans © copyright 2001 - 2012   Legal Notice | Contact Us | Site Map