Applications
For fixed installation on ships and offshore-units at all levels and open deck in safety circuits, where fire resistance is required.
The good screening qualities of the copper braid also reduce radio interferences and electrical influences to electronic installations.
The cables meet the fire characteristics acc. to IEC 60331 as well as the flame test requirement for bunched cables acc. to IEC 60332-3-22 and IEEE 45-18.13. This follows the intention of the SOLAS requirements.
All cables materials are free of halogens. This design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, these cables are especially suitable for the installation on passenger ships.
Design
- Conductor: stranded bare copper class 2
- Insulation: mica tape + XLPE (cross linked polyethylene)
- Inner covering (lapped)
- Armouring: bare copper braid, separator tape (optional)
- Outer sheath: polyolefin, colour: orange
Marking
e. g.: l NEXANS l MPRXCX 331 3x1,5 0,6/1 kV 90°C IEC 60092-353 IEC 60332-3-22 IEC 60331 YEAR *CE* + Metric Marking
Core Identification
In line with DIN VDE 0293-308
1 core: black
2 cores: blue/brown
3 cores: brown/black/grey
4 cores: blue/brown/black/grey
5 to 24 cores cables: all cores white coloured, printed with black numbers, starting in center with 1.
Cables with 3 cores and more also with green-yellow core (has to be stated in order).
|
